How to unload the rear dump truck trailer?

The  dump truck trailer is a kind of engineering vehicle. Its principle is to drive  the hydraulic mechanism through the engine to complete the tilting of  the lifting mechanism to achieve the unloading purpose. After the  unloading, the dump truck trailer is reset, which greatly saves the unloading  time and labor force, shortens the transportation cycle, and improves  the production efficiency. It is widely used in mining, water  conservancy construction, road construction and other fields. How to unload the rear dump truck trailer? Let's give you a brief introduction.

1. Press the clutch pedal of the dump semi trailer.

2. Put in low-speed gear (if it is an 8-gear box, put it in 1st to 4th gear; if it is a 10-gear box, put it in 1st to 5th gear; if it is a Sinotruk gearbox, it does not need to be in gear)

3. Press the power take-off switch and the idle disconnect switch at the same time  (some models only have one switch, press one).

4. Move the lifting switch on the lower left side of the seat upward to the lifting position.

5. Slowly release the clutch pedal, and the big box will lift automatically.

6.. After the rear dump truck trailer is jacked, step down the clutch pedal, take it to the neutral position, close the power take-off switch, and release the clutch pedal.

7. At this time, if you want to drop the top, just move the lifting switch on the lower left side of the seat down to the falling top position.

The above is a brief introduction to how to unload the rear dump truck trailer for your convenience.