Side Tipper Semi Trailer-manufacture,factory,supplier from China

1. ChassisThe frame is mainly composed of girder - welded I-beam, support beam, connection beam, side beam, lock, traction pin connection device, panel, etc.The side beams are generally channel steel or bending pieces. At present, most trailers use channel steel. There will be more side beams for bending pieces with light body, because the requirements for strength are not too large.The supporting beam is the crossing beam, and now most of them are W beams. 2.  Upper bodyFor side wall trailers, the bodywork part refers to railings, gantries, etc.

Changing the hydraulic oil looks like a simple job, but many friends of the driver of the rear-turning semi-trailer do not know how to change it correctly. They often mix the new and old hydraulic oil, which will greatly reduce the service life of the hydraulic system. So how to change the hydraulic oil of the rear tipper semi-trailer? Are there any precautions?The traditional method of replacing hydraulic oil for rear dump semi-trailer is nothing more than extracting the hydraulic oil from the hydraulic oil tank, replacing the hydraulic oil filter element, and then adding new hydraulic oil.

1. Pipeline laying and installationA. Arrange the pipeline reasonably according to the vehicle model. The long pipe shall be connected with the air storage tank of the rear relay valve. The length shall be appropriate and shall not be too loose or tight. The pipe clamp shall be locked on the thread clamp screw on the right side of the longitudinal dye. The thread clamp shall not be missed.

Semi trailers are widely used and cannot be replaced by ordinary vehicles. Almost all materials can be completed by semi trailers. Now let's take a look at the production process of semi-trailer.

First of all, the semi-trailer should do a systematic test during the running-in period to see whether the connection with the host is correct and safe and reliable, check whether there is any problem with the braking system, whether the tire pressure of the semi-trailer meets the standard, and check whether the various parts of the semi-trailer are loose, cracked and deformed.Subsequently, the load of the semi-trailer during the running-in period cannot exceed 80% of the rated load weight; During medium-speed driving, pay attention to the temperature of bearings and hubs.

Do we all have any problems when using lowbed semi-trailers, and we must first check the lowbed truck trailer when we maintain low bed semi-trailers? Where do we check first?

The lower the center of gravity of the lowbed semi-trailer, the better the stability and safety, the stronger the ability to transport ultra-high goods and pass overhead obstacles, the application of lowboy semi-trailer is extensive, the application of lowbed semi trailer is briefly explained below.Lowbed semi-trailer has a wide range of applications, suitable for heavy vehicles, low boy semi-trailer frame cargo table is relatively low, so it has safety during transportation to ensure that the transportation is stable enough.The lownbed semi-trailer walking structure is made of high-strength i

In recent years, due to the interest trend, the semi-trailer market is mixed, and it is difficult to argue between true and false.

On the construction site we can often see a variety of dump semi-trailers, through these dump semi-trailers to transport sand or earth, greatly improve work efficiency, but also save costs, then let's take a look at what problems should be paid attention to when unloading the rear dump semi-trailer. Self-discharging has higher and more requirements for the site than the rear dump semi-trailer.

1. Introduction the present situationWith the improvement of the highway and its infrastructure and the rapid development of the national economy, the demand for semi-trailer with high transport efficiency is growing rapidly in recent years.Among the components of the semi-trailer, the tire is the only component of the vehicle that directly contacts the road surface.