Semi Trailer Skeletal Trailer-manufacture,factory,supplier from China

Semi trailers are widely used and cannot be replaced by ordinary vehicles. Almost all materials can be completed by semi trailers. Now let's take a look at the production process of semi-trailer.

I believe that many people choose to buy used trailers are to save money, after all, the cost of new semi trailer is quite expensive, of course, we also know that this semi-trailer is definitely not as good as a new traielr, and there must be many factors to consider when buying, such as the quality of used trailers, whether used trailers are accident cars, and a series of problems are we have to consider.

Do we all have any problems when using lowbed semi-trailers, and we must first check the lowbed truck trailer when we maintain low bed semi-trailers? Where do we check first?

Master the correct driving method of the dump semi-trailer, the dump semi-trailer in the unloading of the car is rollover or back, we usually drive the dump semi-trailer, we must master the correct driving mode, dump semi-trailer manufacturers to introduce. 1. First of all, when the dump semi-trailer starts, pay attention not to use too much throttle, clutch can not be violently lifted and put, the start must be stable. 2. Avoid some bad driving habits, such as putting your hand on the stop rod for a long time, which will affect the safety of driving and damage the gearbox.

First of all, the semi-trailer should do a systematic test during the running-in period to see whether the connection with the host is correct and safe and reliable, check whether there is any problem with the braking system, whether the tire pressure of the semi-trailer meets the standard, and check whether the various parts of the semi-trailer are loose, cracked and deformed.Subsequently, the load of the semi-trailer during the running-in period cannot exceed 80% of the rated load weight; During medium-speed driving, pay attention to the temperature of bearings and hubs.

1. Introduction the present situationWith the improvement of the highway and its infrastructure and the rapid development of the national economy, the demand for semi-trailer with high transport efficiency is growing rapidly in recent years.Among the components of the semi-trailer, the tire is the only component of the vehicle that directly contacts the road surface.

The lower the center of gravity of the lowbed semi-trailer, the better the stability and safety, the stronger the ability to transport ultra-high goods and pass overhead obstacles, the application of lowboy semi-trailer is extensive, the application of lowbed semi trailer is briefly explained below.Lowbed semi-trailer has a wide range of applications, suitable for heavy vehicles, low boy semi-trailer frame cargo table is relatively low, so it has safety during transportation to ensure that the transportation is stable enough.The lownbed semi-trailer walking structure is made of high-strength i

Because the summer is too hot, people's sleep quality is usually not good, semi-trailer drivers are easy to get tired and doze off during the drive, so in the summer to ensure adequate sleep, and then try to avoid noon.

On the construction site we can often see a variety of dump semi-trailers, through these dump semi-trailers to transport sand or earth, greatly improve work efficiency, but also save costs, then let's take a look at what problems should be paid attention to when unloading the rear dump semi-trailer. Self-discharging has higher and more requirements for the site than the rear dump semi-trailer.

The length of a semi-trailer can vary depending on the specific model, configuration, and applicable regulations. However, in most cases, the length of a semi-trailer ranges from 48 to 53 feet (14.6 to 16.2 meters). These trailers typically have a cargo box that is about 8-8.5 feet (2.4-2.6 meters) in width and 8-9 feet (2.4-2.7 meters) in height.