Modular Lowboy Semi Trailer-manufacture,factory,supplier from China

The lower the center of gravity of the lowbed semi-trailer, the better the stability and safety, the stronger the ability to transport ultra-high goods and pass overhead obstacles, the application of lowboy semi-trailer is extensive, the application of lowbed semi trailer is briefly explained below.Lowbed semi-trailer has a wide range of applications, suitable for heavy vehicles, low boy semi-trailer frame cargo table is relatively low, so it has safety during transportation to ensure that the transportation is stable enough.The lownbed semi-trailer walking structure is made of high-strength i

A low bed trailer and a flatbed trailer are both types of trailers commonly used for transporting goods and equipment. However, they differ in their design and usage.A low bed trailer, also known as a lowboy trailer, is specifically designed to transport heavy and oversized equipment. It has a low deck height, which allows for taller loads to be transported without exceeding height restrictions. It usually has a gooseneck or a detachable gooseneck design, which provides additional stability and ease of loading and unloading.

Semi trailers are widely used and cannot be replaced by ordinary vehicles. Almost all materials can be completed by semi trailers. Now let's take a look at the production process of semi-trailer.

Semi-trailer can transport large volume, and not easy to split large construction machinery, commercial goods, containers, can also transport vegetables, fruits, meat and other packaged fresh items, with good compatibility and speed.1. Intelligent interconnection of logistics vehiclesSemi - trailer intelligent interconnection is the trend.

First of all, the semi-trailer should do a systematic test during the running-in period to see whether the connection with the host is correct and safe and reliable, check whether there is any problem with the braking system, whether the tire pressure of the semi-trailer meets the standard, and check whether the various parts of the semi-trailer are loose, cracked and deformed.Subsequently, the load of the semi-trailer during the running-in period cannot exceed 80% of the rated load weight; During medium-speed driving, pay attention to the temperature of bearings and hubs.

Because the summer is too hot, people's sleep quality is usually not good, semi-trailer drivers are easy to get tired and doze off during the drive, so in the summer to ensure adequate sleep, and then try to avoid noon.

On the construction site we can often see a variety of dump semi-trailers, through these dump semi-trailers to transport sand or earth, greatly improve work efficiency, but also save costs, then let's take a look at what problems should be paid attention to when unloading the rear dump semi-trailer. Self-discharging has higher and more requirements for the site than the rear dump semi-trailer.

The length of a semi-trailer can vary depending on the specific model, configuration, and applicable regulations. However, in most cases, the length of a semi-trailer ranges from 48 to 53 feet (14.6 to 16.2 meters). These trailers typically have a cargo box that is about 8-8.5 feet (2.4-2.6 meters) in width and 8-9 feet (2.4-2.7 meters) in height.

1. Introduction the present situationWith the improvement of the highway and its infrastructure and the rapid development of the national economy, the demand for semi-trailer with high transport efficiency is growing rapidly in recent years.Among the components of the semi-trailer, the tire is the only component of the vehicle that directly contacts the road surface.

Changing the hydraulic oil looks like a simple job, but many friends of the driver of the rear-turning semi-trailer do not know how to change it correctly. They often mix the new and old hydraulic oil, which will greatly reduce the service life of the hydraulic system. So how to change the hydraulic oil of the rear tipper semi-trailer? Are there any precautions?The traditional method of replacing hydraulic oil for rear dump semi-trailer is nothing more than extracting the hydraulic oil from the hydraulic oil tank, replacing the hydraulic oil filter element, and then adding new hydraulic oil.