34 Ton Side Tipper Trailer For Hire In Durban-manufacture,factory,supplier from China

Summer is over, the high temperature is still there, the temperature continues to rise, the hot factory, a busy scene of the "hot" welding car, working in the workshop, feeling that the air around is hot, even if there is a high-power fan with full horsepower, you still feel a burst of heat rushing to your face. The hot and stuffy weather makes people very uncomfortable, similar to the feeling of sauna, so people call it "sauna day".

1. ChassisThe frame is mainly composed of girder - welded I-beam, support beam, connection beam, side beam, lock, traction pin connection device, panel, etc.The side beams are generally channel steel or bending pieces. At present, most trailers use channel steel. There will be more side beams for bending pieces with light body, because the requirements for strength are not too large.The supporting beam is the crossing beam, and now most of them are W beams. 2.  Upper bodyFor side wall trailers, the bodywork part refers to railings, gantries, etc.

Changing the hydraulic oil looks like a simple job, but many friends of the driver of the rear-turning semi-trailer do not know how to change it correctly. They often mix the new and old hydraulic oil, which will greatly reduce the service life of the hydraulic system. So how to change the hydraulic oil of the rear tipper semi-trailer? Are there any precautions?The traditional method of replacing hydraulic oil for rear dump semi-trailer is nothing more than extracting the hydraulic oil from the hydraulic oil tank, replacing the hydraulic oil filter element, and then adding new hydraulic oil.

Here are several factors that contribute to the large difference in production prices of semi trailers. Some key reasons include:Size and customization: Semi trailers come in a wide range of sizes and can be customized to meet specific transportation needs. Larger trailers require more materials and components, which in turn increases production costs.

1. Pipeline laying and installationA. Arrange the pipeline reasonably according to the vehicle model. The long pipe shall be connected with the air storage tank of the rear relay valve. The length shall be appropriate and shall not be too loose or tight. The pipe clamp shall be locked on the thread clamp screw on the right side of the longitudinal dye. The thread clamp shall not be missed.

Because the summer is too hot, people's sleep quality is usually not good, semi-trailer drivers are easy to get tired and doze off during the drive, so in the summer to ensure adequate sleep, and then try to avoid noon.

First of all, the semi-trailer should do a systematic test during the running-in period to see whether the connection with the host is correct and safe and reliable, check whether there is any problem with the braking system, whether the tire pressure of the semi-trailer meets the standard, and check whether the various parts of the semi-trailer are loose, cracked and deformed.Subsequently, the load of the semi-trailer during the running-in period cannot exceed 80% of the rated load weight; During medium-speed driving, pay attention to the temperature of bearings and hubs.

The trailer driver should also pay more attention to the precautions for driving a trailer, which is related to the driving stability of the trailer driver. Before driving a trailer, the driver of the trailer should buy vehicle insurance as early as possible and make insurance planning. Because the semi-trailer is different from the all-in-one vehicle, you should turn up and down when turning. Pay attention to the position of the wheel. The angle of turning of the trailer should be at least one meter greater than that of the main vehicle.

Everyone has different habits when driving, and generally adjusts their rearview mirrors based on their feelings. In fact, there are certain rules for rearview mirror adjustment. Attention should be paid to the following issues during adjustment: For interior rear-view mirrors, adjust the left and right positions so that the left edge of the mirror surface is just cut to the right earline of your image in the mirror.

Important customers from Papua New Guinea visit our factory. During this visit, the customers were deeply impressed by our scale and strength, and praised its advanced production equipment and technical level. It is reported that the visit of Papua New Guinea customers is to further strengthen cooperation with us and expand the cooperation space between the two sides. During the talks, the two sides had in-depth exchanges on specific matters of cooperation projects and reached consensus on further cooperation.