3 Axle Dump Trailer-manufacture,factory,supplier from China

To measure a trailer axle, first, you need to identify the type of trailer axle. There are two types of trailer axles, including the straight axle and drop axle. The straight axle is mounted directly below the trailer deck, while the drop axle is mounted a few inches below the trailer deck.Here are the steps to measure a trailer axle:Measure the length of the axle from one end to the other. You can use a tape measure for this.Determine the weight capacity of the axle.

Master the correct driving method of the dump semi-trailer, the dump semi-trailer in the unloading of the car is rollover or back, we usually drive the dump semi-trailer, we must master the correct driving mode, dump semi-trailer manufacturers to introduce. 1. First of all, when the dump semi-trailer starts, pay attention not to use too much throttle, clutch can not be violently lifted and put, the start must be stable. 2. Avoid some bad driving habits, such as putting your hand on the stop rod for a long time, which will affect the safety of driving and damage the gearbox.

The  dump truck trailer is a kind of engineering vehicle. Its principle is to drive  the hydraulic mechanism through the engine to complete the tilting of  the lifting mechanism to achieve the unloading purpose. After the  unloading, the dump truck trailer is reset, which greatly saves the unloading  time and labor force, shortens the transportation cycle, and improves  the production efficiency. It is widely used in mining, water  conservancy construction, road construction and other fields. How to unload the rear dump truck trailer?

The details of the maintenance of the dump semi trailer should be paid attention to. Safe driving is very important for the dump semi trailer. In order to prevent problems in the future, the dump semi trailer should be regularly checked and maintained. Maintenance details of self-dumping semi-trailer: First, check whether there is a lack of air, debris attachment and other phenomena, whether the steel ring deformation, cracks and other phenomena.

In civil engineering, dump truck trailers often work together with excavators, loaders, belt conveyors and other construction machinery to form a loading, transporting and unloading production line for the loading, unloading and transportation of earthwork, gravel and bulk materials. So what is the structural principle of the rear dump truck trailer? The editor will give you a brief introduction.The rear dump trailers control the movement of the piston rod through the control system. Backward tipping is common. Push the piston rod to make the carriage tip over, and a few two-way tipping.

1. Early wear of the central part of the tire.The main reason is that the tire inflation volume is too large, which not only affects the shock absorption performance of the tire, but also causes excessive deformation of the tire.2. Both sides of the tire are worn too much.The main reason: insufficient inflation of the tire or long-term overload driving, so that the contact surface between the tire and the ground is large, causing the two sides of the tire to contact the ground and form early wear.3.

Dump truck trailers are widely used in construction and transportation industries to transport heavy loads such as sand, gravel, and rocks. These trailers are efficient and ideal for carrying and offloading loose materials quickly and easily. There are different types of dump truck trailers, but there are common parameters that you should consider before making a purchase.Payload capacity: Payload capacity is an essential factor to consider when choosing a dump truck trailer.

Fence semi trailer is a relatively common means of cargo transportation, with a wide range of types and uses.According to the regulations, the height of the fence truck trailer shall not exceed 4.2 meters. According to the regulations, the loading height of heavy and medium-sized trucks and semi-trailers shall not exceed 4 meters from the ground, and the vehicle carrying containers shall not exceed 4.2 meters. Semi trailers are mostly 3 axles trailers, which are connected with semi-trailers through front traction pins.

On the construction site we can often see a variety of dump semi-trailers, through these dump semi-trailers to transport sand or earth, greatly improve work efficiency, but also save costs, then let's take a look at what problems should be paid attention to when unloading the rear dump semi-trailer. Self-discharging has higher and more requirements for the site than the rear dump semi-trailer.

As an engineering vehicle, the dump trailer drives the hydraulic mechanism through the engine of the dump trailer, and then drives the lifting mechanism to complete the tilting action to achieve the purpose of unloading. When the unloading is completed, it will reset. So, what are the advantages of the rear dump trailer?The rear dump trailer has the characteristics of low center of gravity and difficult to overturn when lifting. The frame is made of 16 manganese beam plates, which greatly increases the bearing strength.